Electronic box version B
This box was created in response to various requests from customers who wanted a box for quick assembly, where a slightly larger design compared to the other boxes does not matter.
The B-Box can be powered via the normal ignition switch, or an optionally available RFID antenna can be connected for keyless entry.
Alternatively, you can also connect an optionally available Bluetooth module, which allows full control of your bike via your mobile phone.
Below you can download the Android app for this. 8 status LEDs in the box ensure quick diagnosis during installation and setting of the various functions.
A 20 amp inline fuse is integrated. The outputs are short-circuit proof and self-resetting.
The box controls the following functions:
- Switched output for parking light / license plate light / speedometer etc.
- Ignition (with or without side stand detection)
- Starter (with or without neutral switch detection)
- High and low beam with switches or push buttons
- Integrated flasher relay, controllable via switches or buttons
- Brake light with or without dimming function
- Horn
In addition, the B-Box has a Bluetooth module for controlling the functions via an Android smartphone or an RFID antenna (Keyless Go) to eliminate the key switch.
Dimensions: 92mm length x 50mm width x 36mm height incl. end plug
Power consumption in standby mode: Approx. 0.2mA
Housing: Black impact-resistant ABS plastic, waterproof molded
Input voltage: 7 - 18 volts
Connectors: 1.5 qmm
Maximum continuous output current: 5 amps/output
Maximum ambient temperature: 80 degrees Celsius
Total allowable current: 20 amps
NOTICE:
The following video shows the setting for the RFID antenna: https://youtu.be/DUv6KorNpFg
Here is a short video about setting the parameters: https://youtu.be/P8NdILaev_Q
If you have questions about the right box, you can use the following interactive video: https://www.youtube.com/watch?v=rivetDWvNRro
Show more
There are no reviews written yet about this product..
